Tescom TC-5061A
Pneumatic UHF TEM Cell
 The
TC-5061A, Pneumatic UHF TEM Cell generates the
electro-magnetic field for testing small RF
devices such as wireless pagers, GPS receivers,
portable phones, etc. An external test signal
applied through the input port of the TC-5061A
generates a consistent and predictable TEM test
field inside the cell. The radiation field from
a device transmitting in the cell can also be
detected through the port using a test receiver.
The unique compact and economical design is
optimized for medium accuracy measurements beyond
the standard TEM Cell frequency range.
Applications
ERSS (Equivalent
Received Signal Strength) measurement for Receiver
sensitivity testing
ERP (Equivalent Radiated Power) measurement
for Transmitter radiated power testing
EMI EMS tests for small UHF devices
Pager, Portable Phones, PHS, PCS, GSM, WLL,
CDMA, DECT ¡¡
Key Features
Radiation and susceptibility
test
A broadband TEM Cell up to 3 GHz
Small Size, Small footprint for Desktop application
High Effective Shielding
Specifically designed for all types of portable
phones
Pneumatic Open/Close Construction
RS-232C Open/Close control
Specifications
| VSWR: |
Better than 1 : 1.7,
50 Ohm |
| Path Loss:
|
22dB Typical |
| Effective
Shielding: |
Better than 60 dB,
typically 80 dB, 400MHz to 3GHz |
| Effective
Cell Height: |
220 mm |
| RF Connector:
|
Type N for TEM Cell
input and output, SMA for the DUT RF |
| Field Strength
at Test Point : |
13 dB uV/m at 1 uV
input |
| RS-232C Control
Connector: |
DB9 |
| Line Voltage:
|
100 to 240 volt AC
|
| Compressed
Air: |
4 to 7 kg/cm2 |
| Dimension
: |
344(W) x 380(D) x
725(H) [mm] |
| Door Size
: |
110(W) x 66(H) [mm]
|
| Door Slide
Stroke: |
205 mm |
| Weight Total
: |
21 kg |
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT
PRIOR NOTICE
Home About Products Contact Dealers Links
©WiPath Communications Ltd 2004,2005,2006
|
