|
|
Tescom TC-5953A
W-LAN Shield Box
 Tescom
TC-5953A W-LAN Shield Box is a pneumatic control
RF test fixture that provides RF isolation
and reliable signal connections necessary for
testing various types of Wireless LAN devices
in a test system. With the extensive list of
standard accessories, TC-5953A offers an excellent
value for the test needs of production line,
R&D, service and
QA.
Features
High RF shielding
Pneumatic control for manual or semi-automatic
operation
IEEE 802.11a/b/g 
Applicable to CardBus/PCMCIA, mini PCI, USB,
or LAN devices.
Built-in Bridge for reliable data cable extension
Built-in Hot Swap Capability for mini PCI device
Banana Jack for using external DC power
EMI filters on all data lines
Safety protective cover
RS-232C open-close control
Customization to meet various data and RF connecting
requirements
Easy-to-exchange customized fixtures
Red and Green LED for the Pass/Fail indication
Lid Operation Sensing System for safety
CE compliant: EN 292-1:1991, EN 292-2:1991/A1:1995,
EN 983:1996, EN 1050:1996, EN 60204-1:1997
Customization
Target devices: Wireless LAN devices and similar
devices
Customizable signal connections:
Device control data, RF probe signal
Lid
Operation
Long Life. Typically 1,000,000
open/close cycle
Ability to control lid opening and closing speed
Lid opens when the compressed air is connected
or power is turned on
Built-in electronics open/close counter, able
to read the number of times by control PC
If Lid sensor detects an error that the Lid
is not closed completely, the Lid will move
back to open immediately
DUT Handler and Fixture
Customization
Typically, every device has a unique outline
and connection configuration requiring unique
handler and fixture customization to move DUT
in and out of the cell and make data/RF connections,
and to move probe pins or connectors up and
down for signal probing.
 |
 |
| TC-59431A
Typical Fixture |
TC-59531A
Typical Fixture |
Specifications
| Shielding effectiveness: |
> 55 dB, 2.4GHz including connectors
> 50 dB, 5.8GHz, including connectors |
| RF Connectors: |
Two Type N outside, Two SMA inside |
| Data I/O connectors: |
100pin Shielded Flat Cable, RJ-45, USB
adaptor cable |
| Remote control: |
RS-232C, 3 wire, DB9 type |
| Compressed air requirement: |
5 bar to 10 bar |
| Compressed air connector: |
Sang-A PMM06, 6 mm push on fitting |
| Air connector between fixture
and main body: |
4 mm push on fitting |
| Line voltage: |
100 to 240 volt AC, 50/60 Hz, 16 watt |
| Working space: |
280(W) x 150(D) x 95(H) mm |
| Dimension: |
342(W) x 239(D) x 262(H) mm, close state.
410(H) mm, open state |
| Weight without fixture: |
14 kg |
| Standard Accessories Supplied: |
Operating Manual, Power Cable, Hand Valve,
Lid Stopper, Safety Shield
RS-232C Cable, 1pc.
DB9 Data Cable, 1pc.
NP-SMAP RF Cable, 2pcs.
USB Adaptor Cables: 2pcs, 1m and 15cm
RJ-45 Adaptor Cables 2pcs, 1.5m and 30cm
CBC S/W Driver (1x 3.5¡± diskette)
99120A, PCI to 100pin Adaptor, for right
side motherboard, 1pc.
99120B, PCI to 100pin Adaptor, for left
side motherboard, 1pc.
99110B, 100pin to CardBus Adaptor, 1pc.
99117E, 100pin to mini PCI Adaptor, 1pc. |
Ordering
Information
TC-5953A, W-LAN Shield Box
5952-10, Wire Remote Open/Close Switch
5952-80, Spare gasket Assy, set of 2 pcs
TC-99117E, for Mini PCI
Adaptor
TC-99110B, for CardBus Adaptor
TC-59431A, CardBus Fixture,
for 5953A
TC-59531A, Mini PCI Fixture, for 5953A
View of TC-59431A Fixture
View of TC-59531A Fixture
Home About Products Contact Dealers Links
©WiPath Communications Ltd 2004,2005,2006
|
